DD-120

The DD-120 makes it possible to extend DVI HD content from one source to two DVI displays. Like all PureLink products, its guaranteed to meet the 1080p spec and work flawlessly for many years to come.

 

DD-2100

The DD-2100 enables you to switch 2 digital signals and regenerate the signal up to 10 DVI displays. Like all PureLink products, the DD-2100 is built to be the most reliable device of its kind and offers a unique and affordable solution for pro and semi-pro installations where digital switching is a must.

 

DD-250

The DD-250 is designed to distribute up to 2 DVII switchable inputs (PC, AVR) at full 1080p HD, to as many as 5 HD display monitors with no degradation of the original signal quality or distortion of the image.

 

HD-2100

The HD-2100 allows two digital video sources to be spilt up to 10 digital displays. The built-in amplification function enables HDMI signal distribution without signal loss.

 

HD-250

The HD-250 is designed to distribute up to 2 HDMI switchable inputs (PC, AVR) at full 1080p HD, to as many as 5 HD display monitors with no degradation of the original signal quality or distortion of the image.

 

HDWall 100

The HDWall 100 divides a single HDMI source signal to four displays in a 2x2 configuration. A fifth HDMI output allows multiple processors to be cascaded together to drive even larger video wall configurations.

 

HT-150

The HT-150 1x5 HDMI over HDBaseT Distribution Amplifier offers a simple solution for single source to multiple display distribution up to 330 ft. over a single category CATx cable.

 

UHD-120

The HDTools™ UHD-120 is a 1x2 HDMI distribution amplifier with Ultra HD/4K support designed to reliably distribute a single HDMI source to two separate displays without signal loss or degradation.

 

 

UHD-140


This item has been discontinued. 
Suggested replacement: UHD2-140 

 

UHD2-140

The HDTools™ UHD2-140 is 1x4 HDMI distribution amplifier providing complete 4K/60 (4:4:4) video distribution with support for HDR (High Dynamic Range) content and HDCP 2.2 compliance.

 

UHD-280

The HDTools™ UHD-280 is a 2x8 HDMI distribution amplifier with Ultra HD/4K support designed to reliably switch and split two HDMI sources to eight separate displays without signal loss or degradation.

 

VIP-100 II Rx

The VIP-100 II IP video receiver extends and distributes HDMI, RS232, and IR over IP. The VIP-100 II also provides point-to-point extension at distances up to 394 ft., as well as matrix switching of multiple devices, all with PoE support and convenient channel-viewing using the front panel LED display.